IBC WallFix
The system for every wall
The new IBC WallFix is the intelligent solution for solar energy generation on a buildings facade. Flexible, safe and easy to install on practically any wall - whether in the commercial and industrial sector or on your own home.


Module
Approved for the wall.
Façade modules have to withstand higher wind and suction forces as they are mounted parallel to the wall. They must also fulfil higher fire protection requirements than standard modules. As PV modules on the façade are categorised as part of the building envelope and therefore as a construction product, they require a general building authority approval (abZ). And last but not least, the appearance of the façade is crucial, so modules must integrate harmoniously into the building.

Spacer screw RDS-CA
Easy to install and flexible.
The screw system is a certified passive house component and is approved by the building authorities. The screws fulfil all fire protection requirements for rear-ventilated rainscreen cladding. Optimum load transfer through truss screw connection.

Insertion rail
It's the look that counts.
The high-quality anodised components are quick and easy to install. The use of different rail widths - depending on the module frame height - not only guarantees cost-optimised use of materials, but above all an optimum, secure fit of the module in the rail. The modules are inserted directly into the profile rails. Module clamps are not required. This saves time and reduces installation costs.

More energy from unused surfaces.
With IBC WallFix, every wall becomes an energy source. Vertical module installation not only provides additional energy yields, but is also a real eye-catcher - especially in commercial areas or prestigious buildings. What's more, a facade PV system is often even more profitable than a rooftop system when the sun's rays are flat, such as in the mornings, evenings or during the winter months.

Easy to mount on practically any wall.
Whether brick, concrete or trapezoidal sheet metal - IBC WallFix enables the secure and approved attachment of PV modules to a wide variety of facade substrates. The connection components guarantee a permanently reliable installation, and the Wallfix will have all the necessary certifications (abZ / aBG) by the end of 2025. Approval in individual cases (ZiE) or project-related type approval (vBG) is not required.
The ideal addition for facades.
Universal.
Suitable for almost all insulated and non-insulated façade substrates such as concrete, masonry and trapezoidal sheet metal.
Safe.
All components calculated in combination. Simulations and tests by K.I.T. (Karlsruhe Institute of Technology) available and a general building authority approval is being sought.
High quality.
Long service life thanks to the use of optimised materials such as aluminium and stainless steel.
Guaranteed.
Maximum safety with a 15-year combined warranty.
Aesthetic.
High-quality anodised components ensure an elegant and sophisticated design.
Economical.
The system is specially optimised for façades and ensures a consistent yield throughout the year.
Engineered in Germany.
The entire IBC WallFix system was designed and tested in Germany.
Fast.
Simple assembly system with few tools and components.
By the way: IBC SOLAR is part of research
We are a project partner in the Solar Envelope Center, a Fraunhofer ISE research project for the solarisation of the building envelope in new and existing buildings. The close cooperation with project partners from architecture, project development and AI research guarantees expertise in all areas of facade solarisation. Whether preliminary project planning, construction process integration, system construction or grid integration. We accompany you all the way to your own facade PV system.

Get to know other systems from the mounting sector.
AeroFix
Flat roof system
Our aerodynamic flat roof mounting system offers countless possibilities for customised and economical roofs with PV modules - and all without penetrating the roof.

TopFix
Pitched roof system
The IBC TopFix was specially developed for universal use on almost any pitched roof. It is particularly suitable for use on roofs with roof tiles, trapezoidal sheet metal, corrugated eternit and sheet metal seam covers.

AeroFlat
Inclined flat roof
The roof-parallel, aerodynamic mounting system for commercial roofs is specially designed for pitched bitumen and foil roofs and can be used up to a maximum roof pitch of 30 degrees and a roof height of up to 35 metres.

Are you interested in our IBC WallFix?
Would you like to realise PV on the facade and need advice or further information on the new IBC WallFix system? Simply contact us using the form below. We look forward to your enquiry!
Please note that all fields marked with "*" are mandatory.
Do you have any questions in advance?
Then please contact our mounting expert directly.
Shop
Are you already a customer? Then log in directly to the online shop. You will find all assembly components there. Have a look right now.
Private customer
Are you a private customer? Then take a look at how to get a solar system installed at your home as quickly as possible.
All our assembly systems are primarily designed for safety, speed and durability. We continuously optimise the products, also according to your requirements. Watch our YouTube channel to learn how easy installation is.
Watch assembly videos