Request adviceRequest advice

IBC SOLAR Mounting Systems

Stable. Secure. Smart.

You give your all every day – we supply the systems that keep up. Whether flat roof, pitched roof or facade: we have the right mounting system for every surface – well thought-out, robust and easy to install. For everyone who wants to install cleanly – and offer their customers a solution with substance.

Our mounting systems have been delivering on their promise since 1982. Because your work should not only be impressive today – but also in 20 years' time.

For everyone who installs with heart and intellect.

 

Stable. Safe. Smart. Our mounting systems at a glance.

IBC AeroFix

Flat roof - done and dusted

IBC AeroFix is the next generation of aerodynamic flat roof mounting - even more flexible, even more economical. Completely without roof penetration, but with maximum safety and clever design. For everyone who wants to get the best out of every flat roof.

IBC TopFix

Pitched roof - top solution

IBC TopFix cuts a fine figure on any roof - whether tile, trapezoidal sheet metal, corrugated eternit or sheet metal seam covering. One system, many possibilities: robust, flexible and developed for universal use. That's how quick and easy pitched roofing is today.

IBC WallFix

Facade - beautifully utilised

With IBC WallFix you get solar power directly from the wall - smart, stable and quickly installed. Whether you have your own home, a commercial building or an industrial building: our solution generates energy on otherwise unused surfaces and impresses with its aesthetics on the wall.


Our assembly systems are designed to meet the highest demands: stable in design, safe in operation and smart in assembly. We are constantly developing them further - practical, durable and efficient.

And always with your requirements in mind. How easy is it to assemble? We show you on our YouTube channel.

YouTube Videos

A comparison of our mounting systems. The perfect solution for every application, developed by experts for experts.

IBC AeroFix

IBC TopFix

IBC WallFix

Area of application

Flat roof

Pitched roof

Facade

Material

Aluminium, stainless steel

Roof pitch

0° to 10°

5° to 75°

> 75° (vertical)

Module orientation

South, east-west

Roof parallel

Wall parallel

Special features

Wind tunnel tested, aerodynamic; optional fall protection

ZVDH-compliant, form-fitting sheet metal roof tiles

Design solution; insertion system and clamping system

And there's more - here's an overview of our unique solutions.

In addition to our three main systems IBC AeroFix, TopFix and WallFix, we offer further innovative mounting solutions for special areas of application. Whether safety on flat roofs, elegant installation on tiled roofs or reliable fastening on pitched commercial roofs - discover our supplementary systems:

 

AeroFix Latch

Fall protection

DEKRA-certified and EU type-examination certified: For safe maintenance work directly on the module field.

AeroFlat

Inclined flat roof

Aerodynamic system for bitumen and foil roofs with a pitch of up to 30° and a height of several metres.

TopFix 200

Insertion system

The elegant solution for tiled roofs: roof-integrated look, simple installation, full rear ventilation.

Suitable systems. Many possibilities. Maximum security.

A system concept that connects: All key components of our assembly systems are compatible across all systems - for simple storage and efficient assembly.

Safely certified: All connections have DIBt approval or are in the approval process (WallFix).


 

Stable.

Long service life thanks to the use of optimised materials such as aluminium and stainless steel. Withstands wind, weather and time - without compromise.

Safe.

All components are calculated in combination and all systems are tested for stability and safety by independent testing institutes.

Smart.

Pre-assembled components and sophisticated technology ensure efficient installation and perfect customisation to all conditions and requirements.

Guaranteed.

Comprehensive warranty protection and long-term value stability for your installation thanks to our unique 15-year warranty on mounting systems and modules in combination.

The right solution for every role.

Whether you are installing, planning or just want a beautiful, electricity-producing roof - we have the right solution for you.


 

  • For installers
  • For planners & architects
  • For end customers
  • Do you want to assemble quickly and reliably - and impress your customers in the process? Our assembly systems are so well thought out that the assembly time is minimised and the holding time is maximised.

    Prefabricated components and clever details save you valuable time. And that counts - especially on the roof.

    As a partner of IBC SOLAR, you can bring projects to the roof much more efficiently and economically. Benefit not only from our comprehensive product portfolio, but also from customised tools and services.

    Find out more about our specialist partner programme
    Browse the product catalogue now
    Contact us directly

  • Are you planning the energy supply of tomorrow or integrating PV systems into architecturally sophisticated projects? Our systems offer you the flexibility you need.

    Thanks to detailed data and clear technical specifications, integration is simple and precise - with exactly the details that matter.

    Contact us

  • Would you like to invest in a durable solar energy system that can withstand extreme weather conditions? Our certified mounting systems provide a stable foundation for your energy transition.

    Quality "Engineered in Germany" and a 15-year guarantee give you the certainty that your investment will pay off in the long term.

    To our home systems

PV Manager. Plan faster.
Calculate more precisely.

With our PV Manager software, you benefit in several ways when planning your systems: All our mounting systems are already integrated into the programme. Thanks to automatic updates, the software is always up to date - including clear graphics and structured documents. Your complete system planning results in a parts list that you can transfer directly to our online shop. This means you have the material you need in no time at all.

Advantages for installers:

  • Fast and intuitive planning of PV systems
  • Automatic calculation of the required components
  • Time savings thanks to direct transfer of parts lists to the shop
  • Static calculations and ballasting plans
  • Complete integration of all IBC SOLAR mounting systems


Learn more

Only at IBC SOLAR: The combination warranty.

Whether material weakness or loss of performance - if one of these applies, you don't want discussions, you want a good and quick solution. You will find this in the new 15-year combined warranty on IBC SOLAR mounting systems and IBC SOLAR modules.

This means that your customers receive a 5-year longer warranty than if they purchased the individual components separately. We are the direct contact and guarantor in one and ensure an uncomplicated settlement in the event of a claim.


Learn more

Downloads & Documentation

All technical documentation, instructions and certificates in one place.

We are available to answer any questions you may have about our mounting systems.

Please feel free to contact us using the following contact form.
We look forward to a non-binding, initial discussion with you and will get back to you as soon as possible.

Please note that all fields marked with "*" are mandatory.

Title *

Mounting systems: Install solar systems quickly and safely

Mounting systems from IBC SOLAR are characterised by their quick installation, durability and stability. IBC SOLAR offers on-roof mounting for uncomplicated photovoltaic installation. It is not only cost-effective, but is also equally suitable for new roofs as well as existing and renovated roofs. IBC SOLAR photovoltaic mounting systems are suitable for pitched roof and flat roof installation. For the respective roof covering such as tiles, trapezoidal sheet metal, corrugated eternit, bitumen, foil, green roof or gravel, we offer perfectly matched fastenings that guarantee extreme stability. Flat roof installation has been specially optimised in the wind tunnel. A perfect design can be created for every shape and size of roof using the "PV Manager" planning software. All our mounting systems are characterised by a low system weight and, thanks to the high degree of prefabrication, also by the short installation time. This is a strength of which we are particularly proud and which has been confirmed by the trade journal "Photovoltaik - Solartechnik für Installateure, Planer, Architekten". In its independent installation test, IBC SOLAR AeroFix was "fastest of all classes"! None of these factors are at the expense of the safety or stability of our products. With their UV and weather-resistant aluminium and stainless steel materials, the substructure and brackets of these solar mounting systems can withstand even extreme wind and weather conditions.
 

Mounting systems for pitched roofs

Pitched roofs are the most common type of roof in Germany. They are ideal for photovoltaic installation, as they can absorb a large proportion of the sun's rays and convert them into energy if they have the right pitch. Ideally, the pitched roof should be south-facing. This is where the solar radiation and yield are greatest at midday. East-west orientated roof systems are also very lucrative, as they can provide more energy in the morning and evening in particular, when households generally need the most electricity.
 

For your pitched roof: roof hooks and co.

The roof hooks are used to attach the mounting system to the roof truss. As they are screwed directly onto the rafters, they must be matched to the respective tile shape. Depending on the roof covering, hanger bolts, sheet metal seam clamps or trapezoidal sheet metal clamps are also used as fasteners.
 

Mounting systems for flat roofs

As the name suggests, the flat roof solar system is installed on flat roofs. The IBC AeroFix mounting system is easily installed on the roof without penetrating the roof. The IBC AeroFix mounting system offers secure installation with low weight and high storm resistance. The stronger the wind blows, the well-designed aerodynamics ensure a high level of system safety even during storms, guaranteeing constant photovoltaic yields without failures.
 

For your flat roof: building protection mat and co.

The building protection mat forms the bottom layer of a solar mounting system on flat roofs. It is essential to protect the waterproofing from the pressure load of the photovoltaic system. Incorrect or inadequate building protection prevents water drainage and damages the entire roof structure. The materials required for a photovoltaic flat roof also include ground rails, supports, module clamps and wind brackets. We also supply our specialist partners with detailed installation instructions and installation plans.
 

Essential components of photovoltaic installation

We strongly advise against installing photovoltaic systems yourself, and this also applies to our solar mounting systems. For a professional and flawless installation of the mounting systems, please contact our certified specialist partners. They will install your solar system efficiently and professionally. Find out more about the main components of mounting systems for pitched roofs and flat roofs here.
 

Planning is the be-all and end-all

One of the first steps for a specialist when planning your photovoltaic system is to identify any shading that could impair the yield of the solar system. Possible obstacles include trees, neighbouring houses, mountains, dormer windows or chimneys. By recording shading, roof cladding, pitch, condition and cable routing options in advance, potential disruptive factors can be identified and taken into account during planning. With this information, we can customise your photovoltaic mounting system for you and soon you too will be able to enjoy the benefits of renewable energy without any complications.